@article { author = {Valipour, P. and Hashemi, M and Toosi Jamali, M.R and Ekrami, E.}, title = {Evaluation of Reactive Dye Adsorption by Chitosan-Treated Cotton Fabrics}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {3-8}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {One of the common problems encountered in dyeing textiles with reactive dyes is their weak adsorption and take up by the textiles. In this work, the adsorption behavior of reactive dyes on the cotton fabric treated with chitosan was investigated. Initially, the cotton fabrics were treated with potasium periodate as an oxidating agent; subsequently impregnated with chitosan and finally dyed with two reactive dyes, with MCT (Remazol deep RR gran) and MCT/VS (Remazol deep red RGB gran) mono- and bifunctional groups. The obtained results indicated that the chitosan treatment could increase the dye adsorption as well as its fixation to cellulose. The samples, treated with chitosan followed by reduction with potassium hydrosulphate, showed the best dye adsorption properties. Generally the fastness properties of chitosan-treated cotton fabrics were acceptable as compared to untreated samples. Based on the obtained results, treatment of cotton samples with chitosan can be used in order to increase the adsorption of reactive dyes.}, keywords = {dye adsorbtion,Chitosan,cotton fabrics,reactive dye}, title_fa = {بررسی جذب مواد رنگزای واکنش پذیر روی پارچه پنبه ای عمل آوری شده با کیتوسان}, abstract_fa = {از مشکلات متداول در رنگرزی کالاهای نساجی با مواد رنگزای واکنش پذیر، جذب و رمق کشی کم این گروه از رنگزاهاست. در این پژوهش، رفتار جذب رنگزاهای واکنش پذیر در رنگرزی پارچه پنبه ای عمل آوری شده با کیتوسان بررسی شده است. بدین منظور پارچه های پنبه ای ابتدا با اکسنده پتاسیم پریدات عمل آوری شده، سپس در محلول اسیدی کیتوسان آغشته سازی و در ادامه با دو نوع رنگزای واکنش پذیر دارای گروه های عاملی MCT و MCT/VS رنگرزی شدند. نتایج این آزمون ها نشان می دهد، استفاده از کیتوسان سبب نفوذ و تثبیت بیشتر و بهبود ثبات رنگزای واکنش پذیر روی پارچه مورد آزمون می شود. از این میان، نمونه های عمل آوری شده با کیتوسان و کاهش یافته به وسیله سدیم هیدروسولفیت از بیشترین مقدار رمق کشی و جذب برخوردار بوده اند. همچنین، به طورکلی پارچه های پنبه ای عمل آوری شده با کیتوسان در مقایسه با نمونه های عمل آوری نشده خواص ثباتی قابل قبولی دارند. بر اساس نتایج به دست آمده، عمل آوری کالای پنبه ای با کیتوسان می تواند برای افزایش مقدار جذب رنگزاهای واکنش پذیر استفاده شود.}, keywords_fa = {جذب رنگزا,کیتوسان,پارچه پنبه ای,رنگزای واکنش پذیر}, url = {https://www.jtst.ir/article_3937.html}, eprint = {https://www.jtst.ir/article_3937_fc6ed3aac456b144ec2d14221029c9a7.pdf} } @article { author = {Ahmadi, M. S. and A. Jeddi, A. A.}, title = {Effect of Knit Structure on Tensile Properties of Warp Knitted Geogrids}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {9-14}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Geogrids are important part of geosynthetic materials and have various applications in civil engineering constructions. Some geogrids are produced by textile processing methods. These geogrids contain a reinforcement fabric coated with a polymeric substance. In this paper, two common knit structures were produced as raw fabrics for warp knitted geogrids. In these structures, high count reinforcement polyester yarns were bonded to the fabric by using polyester binder yarns with special lapping patterns. After coating with an acrylic resin and performing tensile tests on the produced geogrids, it was observed that the structure in which the reinforcing yarns were surrounded by binder yarns showed higher tensile-strength-at-break, higher elongation-at-break and lower coefficient of variation than the structure with floating yarns, due to higher structural regularity and uniform distribution of tensile loads on the coated yarns of the former structure. The new structure was found to be ideal for producing geogrids with flexible yarns.}, keywords = {Geogrid,polyester,knit structure,tensile properties,coating}, title_fa = {اثر ساختار بافت بر خواص کششی ژئوگریدهای حلقوی تاری}, abstract_fa = {ژئوگرید ها دسته ای مهم از مواد ژئوسنتتیک را تشکیل می دهند که کاربردهای زیادی در طرح های مهندسی عمران دارند. بخشی از ژئوگریدها به وسیله فرایندهای نساجی تولید می شوند. این نوع از ژئوگریدها شامل یک پارچه تقویت کننده پوشش داده شده به وسیله نوعی ماده پلیمری هستند. در این پژوهش، دو ساختار رایج به عنوان پارچه خام ژئوگرید در سامانه حلقوی تاری تولید شد. در این ساختارها نخ های تقویت کننده که از جنس پلی استر با نمرات زیادند، به وسیله نخ های متصل کننده پلی استری با حرکت لپینگ مشخص به بدنه پارچه متصل می شوند. پس از انجام عملیات پوشش دهی با نوعی رزین آکریلیکی و انجام آزمون کشش مشخص شد، در ساختاری که در آن نخ های تقویت کننده به وسیله نخ های متصل کننده محصور می شوند، نسبت به ساختاری که نخ های تقویت کننده در آن آزاد هستند، میانگین نیروی پارگی و ازدیاد طول تا پارگی بیشتر و ضریب تغییرات کمتر است. این مسئله به علت نظم و آرایش یافتگی بیشتر و در نتیجه توزیع یکنواخت تر بار کششی روی نخ های تقویت کننده در ساختار اول است. ساختار مزبور برای تولید ژئوگرید از نخ های انعطاف پذیر مانند نخ های پلی استر ساختاری مناسب تشخیص داده شد.}, keywords_fa = {ژئوگرید,پلی استر,ساختار بافت,خواص کششی,پوشش دهی}, url = {https://www.jtst.ir/article_3938.html}, eprint = {https://www.jtst.ir/article_3938_0f9fd841dc7867efbee8cb9e1747db0f.pdf} } @article { author = {Tabarbaeei, M. M. A. and Rashidi, A. R. and Cheraghali, M. H.}, title = {Influential Factors on Proper Implementation of Organizational Resource Programming in Spinning Industry: Case Study of Mazandaran Region}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {15-22}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The "enterprise resource planning" (ERP) and business process integration through organizations have many benefits, including increased productivity, improved quality and lower costs. However, ERP implementations are complex and expensive and the processes of ERP implementation projects often fail. In this research, the most influential elements, verified by appropriate publications and discussions with the experts, in breaking down of ERP systems has been categorized in four groups of: managerial, human resources, processing and technological factors. To determine the level of importance of each element and ranking of statistical companies, based on their readiness in implementing a successful ERP, some questionnairs were handed out. The identified elements, found by the experts, were evaluated through Shanon entropy technique to assess their degree of significance. According to the weight of every element, we ranked companies through TOPSIS technique (Excel software) and linear assignment (Lingo software and answers like Global optimal). Because of the incompatibility of some results of these two techniques, we used the combinatory mean arithmetic to reach unanimous consent. The results showed that the companies which were ready to implement ERP successfully were specifically fulfilled by their managerial and human resource preparedness.}, keywords = {ERP,recognition,Success Factors,Implementation}, title_fa = {عوامل مؤثر بر اجرای موفق برنامه ریزی منابع سازمانی (ERP) در صنعت ریسندگی- مطالعه موردی : استان مازندران}, abstract_fa = {برنامه‌ریزی منابع سازمانی (ERP) از راه یکپارچه‌سازی فرایندهای کسب و کار برای سازمان‌ها مزایای زیادی از جمله افزایش بهره‌وری، بهبود مدیریت کیفیت و کاهش هزینه‌ها را به همراه دارد. با این حال اجرای ERP فرایندی هزینه‌بر و پیچیده است و در نتیجه بسیاری از طرح‌های اجرای ERP با شکست مواجهه می‌شوند. در این پژوهش، مهم‌ترین عوامل مؤثر بر اجرای موفق سامانه‌های ERP پس از بررسی ادبیات موضوع و مصاحبه با خبرگان و متخصصان شناسایی به چهار گروه عوامل مدیریتی، عواملانسانی، عوامل فرایندی و عوامل مرتبط با فناوریدسته‌بندی شدند. سپس، برای تعیین مقدار اهمیت هر یک از عوامل مزبور و رتبه‌بندی شرکت‌های جامعه آماری از نظر مقدار آمادگی برای استقرار موفق ERP پرسش‌نامه‌هایی توزیع شد. عوامل شناسایی شده توسط خبرگان، به روش آنتروپی شانون وزن‌دهی و اهمیت هر یک از آنها معین شد. با توجه به وزن‌های به‌دست آمده برای هر یک از عوامل به کمک روش‌های TOPSIS (در نرم‌افزار EXCEL) و تخصیص خطی (در نرم افزار Lingo و جواب‌هایی از نوع Global Optimal)، شرکت‌ها از لحاظ مقدار آمادگی برای اجرای موفق سامانه‌های ERP رتبه‌بندی شده‌اند. به دلیل ناهمخوانی نتایج حاصل از دو روش مزبور، برای رسیدن به یک اجماع کلی از روش ادغامی میانگین حسابی استفاده شد. نتایج نشان می‌دهد، شرکت‌هایی که در آنها عوامل شناسایی شده، به‌ویژه بسترهای عوامل مدیریتی و انسانی مهیاتر باشد، آمادگی بیشتری برای اجرای موفق ERP دارند.}, keywords_fa = {ERP,شناسایی,عوامل موفقیت,اجرا}, url = {https://www.jtst.ir/article_3939.html}, eprint = {https://www.jtst.ir/article_3939_533d65a16d3d7b0f06b5ee1ceb6b8f4a.pdf} } @article { author = {Mazrouei-Sebdani, Z. and Khoddami, A.}, title = {A Review on Superhydrophobicity: A Characteristic Property of Textiles}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {23-38}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Surface properties sometimes play a more important role in the function of polymer materials than do the bulk of polymer materials. The surface structure of fibres is of the great importance for the properties of fibres and textiles in processing and use. Because many functions of the polymer materials, e.g. friction, adhesion, adsorption, and liquid penetration, dye ability, hydrophilicity and hydrophobicity related to the topmost layer of the materials. In order to develop textile materials with the desired performance, the surface of fibres is often modified with polymer coatings before use. Water and soil repellency has been one of the major targets for fiber and textile scientists and manufacturers for centuries. To attain limited wettability, in addition to use of a layer with low surface energy, it is necessary to change surface structure in nano-micro scales. These surfaces are known as superhydrophobic surfaces with properties such as lotus leaves. To fabricate superhydrophobic surface on metal, glass, polymer and textiles, many methods and materials are examined to create proper surface roughness and low surface energy, respectivelly. In this review paper, production and properties of superhydrophobic textiles are reported.}, keywords = {superhydrophobicity,Nanotechnology,Roughness,surface energy}, title_fa = {مروری بر ابرآبگریزی: خاصیتی ویژه در منسوجات}, abstract_fa = {در موارد بسیاری، خواص سطح پلیمرها متفاوت از خواص توده کالا و حتی مهم تر از آن است. ساختار سطح الیاف، در فرایند و استفاده بعدی الیاف و منسوجات، از اهمیت بسیاری برخوردار است. زیرا خواصی همچون اصطکاک، چسبندگی، جذب، نفوذ مایعات، رنگ پذیری، آبگریزی و آبدوستی همگی تحت تأثیر سطح هستند. برای تولید مواد نساجی با کارایی مدنظر، سطح الیاف معمولاً با پوشش های پلیمری اصلاح می شود. مدتهاست که آبگریزی سطح الیاف یکی از مهم ترین اهداف صنایع بوده است. به تازگی، برای افزایش مقدار آبگریزی سطح، افزون بر استفاده از پوشش های آبگریز با انرژی سطحی کم، از تغییر فیزیکی ساختار سطح به شکلی که زبری هایی در ابعاد میکرو- نانو ایجاد شود، نیز استفاده می شود. چنین سطوحی به عنوان سطوح ابرآبگریز با خواصی شبیه برگ نیلوفر آبی شناخته می شوند. تاکنون از روش های متعددی برای ایجاد زبری سطح و مواد مختلف همچون سیلان ها و فلوئوروکربن ها برای کاهش انرژی سطح استفاده شده تا بتوان سطح ابر آبگریز را روی مواد مختلف مانند فلز، شیشه، پلیمر و منسوج ایجاد کرد. در این مقاله، مختصری درباره منسوجات ابرآبگریز، روش تهیه و خواص آنها بحث شده است.}, keywords_fa = {ابر آبگریزی,نانوفناوری,زبری,انرژی سطح}, url = {https://www.jtst.ir/article_3943.html}, eprint = {https://www.jtst.ir/article_3943_778604ef8f360821a55e497b40aadfed.pdf} } @article { author = {Hoseinpour Kasgari, A. R. and Moghassem, A. R. and Soleimani Ashrafi, M. and Valipour, P.}, title = {Effect of Sliver Feeding Position in a Drawing Frame on Radial Distribution of Fibers in Cross-Section of Cotton-Polyester Blended Yarn}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {39-46}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Nine different ring cotton-polyester blended yarns (50/50) were prepared to study the effects of sliver feeding position in drawing frame on fibers distribution in yarn cross-section and its properties. Different slices of each type of yarn were cut to take images of yarn cross-section after spinning and dying processes. First, the radial distribution of fibers in yarn cross-section was analyzed using Hamilton migration index. The strength and elongation-at-break of the samples were assessed as two parameters for possible changes affected by fibers positioning. The results showed that, cotton and polyester sliver feeding position in drawing frame did affect fiber distribution of the yarn cross-sectionally as the Hamilton migration index and fiber frequency distribution were different in the prepared yarns. Migration indexes were varied between 9% and 58% in the spun yarns. In addition, there were found meaningful differences between the strength and elongation-at-break of the yarns due to changes in fiber positioning mode which would help to obtain yarns with minimum and maximum strengths.}, keywords = {blended yarn,fibers migration,yarn cross-section,fibers radial distribution,hamilton migration index}, title_fa = {اثر موقعیت استقرار فتیله در بخش تغذیه ماشین چندلاکنی بر توزیع شعاعی الیاف در سطح مقطع عرضی نخ پنبه - پلی استر}, abstract_fa = {مطالعه حاضر، برای ارزیابی اثر موقعیت استقرار فتیله در بخش تغذیه ماشین چندلاکنی بر توزیع الیاف در سطح مقطع عرضی نخ انجام شده است. بدین منظور، 9 نمونه مختلف نخ رینگ متشکل از الیاف پلی استر و پنبه (50/50) با در نظر گرفتن تغییر در چیدمان بانکه الیاف ریسیده شد. پس از ریسندگی و رنگرزی، چند برش از هر نمونه نخ برای عکس برداری از سطح مقطع عرضی آن آماده شد. ابتدا توزیع شعاعی الیاف با بهره گیری از شاخص مهاجرت Hamilton و سپس استحکام و ازدیاد طول تا حد پارگی نخ به عنوان پارامتر کیفی متأثر از جای گیری الیاف در سطح مقطع اندازه گیری شد. نتایج نشان می دهد، موقعیت استقرار فتیله الیاف پنبه و پلی استر بر توزیع لیف در نخ مؤثر است، به طوری که شاخص مهاجرت محاسبه شده برای نمونه های نخ و تعداد الیاف شمارش شده در لایه های مختلف فرضی با یکدیگر متفاوت اند. مقدار این ضریب از % 9 تا % 58 متغیر است. از سوی دیگر، به دلیل تغییر در مکان یابی الیاف، استحکام و ازدیاد طول تا حد پارگی نمونه ها نیز دارای تفاوت معنی دار آماری است، به طوری که می توان نمونه نخ با بیشترین و کمترین استحکام را معرفی کرد.}, keywords_fa = {نخ مخلوط,مهاجرت الیاف,سطح مقطع عرضی نخ,توزیع شعاعی الیاف,شاخص مهاجرت Hamilton}, url = {https://www.jtst.ir/article_3944.html}, eprint = {https://www.jtst.ir/article_3944_23e73731e614131b596707f156c03e3c.pdf} } @article { author = {Fasahat, F. and Peivandi, P.}, title = {Derivation of Fabric Parameters from Simulated Imaging by Genetic Algorithm Method}, journal = {Journal of Textile Science and Technology}, volume = {3}, number = {2}, pages = {47-56}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Detecting correct color and weave patterns in colored yarn fabrics is one of the most important demands of fabric designers and manufacturers; it is time consuming and acquires high working precision. In this regard, image processing of metaheuristic algorithms can present a useful method for achieving this point. In this research, a novel method, based on genetic algorithm, has been applied to distinguish fabric parameters of color pattern, its period number and weave pattern simultaneously. The parameters have been extracted from the fabric images simulated manually by the computer. The algorithm has been performed on 30 simulated fabric images with different weave and color patterns in variable sizes. Results indicate that in all the images except the defective ones, the fitness values of 100% have been obtained. In spite of existing maximum 3 faults in the simulated image, the presented algorithm is capable of detecting correct color patterns.}, keywords = {Genetic algorithm,color pattern,simulated image,fabric}, title_fa = {استخراج پارامتر های پارچه از تصویر شبیه سازی شده با استفاده از روش الگوریتم ژنتیک}, abstract_fa = {تشخیص صحیح طرح رنگ و بافت در پارچه با نخ های رنگی از مهم ترین نیازهای طراحان و تولید کنندگان پارچه است. این مهم، امری زمان بر است و نیاز به دقت زیادی دارد. در این راستا، پردازش تصویر با استفاده از الگوریتم های فرا ابتکاری می تواند روش مفیدی را برای دستیابی به این هدف ارائه دهد. در این پژوهش، با کاربرد روشی جدید بر پایه الگوریتم ژنتیک، پارامترهای طرح رنگ، تعداد تکرار آن و طرح بافت به طور هم زمان از تصاویر پارچه های رنگی شبیه سازی شده با رایانه، استخراج شده است. این الگوریتم روی 30 تصویر شبیه سازی شده پارچه با طرح های بافت، الگوهای رنگی و اندازه های متفاوت اجرا شده است. نتایج نشان می دهد، در همه تصاویر ارائه شده به جز تصاویر معیوب، مقدار برازندگی %100 به دست آمده است. الگوریتم ارائه شده قابلیت تشخیص طرح رنگ صحیح، حتی با وجود ایراد را تا سه نخ در تصویر شبیه سازی شده دارد.}, keywords_fa = {الگوریتم ژنتیک,طرح رنگ,تصویر شبیه سازی شده,پارچه}, url = {https://www.jtst.ir/article_3945.html}, eprint = {https://www.jtst.ir/article_3945_459d2b1dca3878aee19ce4222059d266.pdf} }