@article { author = {طهرانی دهکردی, دکتر مجید}, title = {Numerical Analysis of In-plane Compressive property of Nonlinear Composites Using Finite Element Method}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {3-9}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The nonlinear behavior was observed in the pure and hybrid composites subjected to the in-plane compressive force. For analyzing the compressive behavior of nonlinear composites, the compression process was simulated on these types of composites using finite element method. In the proposed simulation, a four-ply composite with the unidirectional stacking sequence was designed and compression test was executed on the composite model. In these models, the mechanical properties of composite layers were defined based on elastic and plastic behaviors. The Lamina and Isotropic classify were selected for the elastic and plastic zones, respectively. In order to validate the simulated model; the theoretical results of some nonlinear composites were compared with the experimental ones. It was concluded that the model acceptably predicts the compressive stress at different strain for nonlinear composites. As can be seen, the differences between numerical and experimental at maximum compressive stress of investigated specimens are 8% to 17%. To improve the numerical results and reach the real composite model, the applied assumptions have to be decreased or corrected.}, keywords = {In-plane compressive property,Finite Element,Composite,Nonlinear behavior}, title_fa = {تحلیل عددی خواص فشاری درون صفحه ای کامپوزیت های غیرخطی با استفاده از روش اجزای محدود}, abstract_fa = {برای کامپوزیت‌های هیبریدی تحت فشار درون صفحه‌ای، رفتار غیر خطی مشاهده می‌گردد، از این رو در این پژوهش، کامپوزیت دارای رفتار غیرخطی تحت بارگذاری فشاری بر مبنای روش عددی اجزای محدود مدل‌سازی شده است تا رفتار فشاری درون صفحه‌ای آن بررسی شود. در شبیه‌سازی ارائه شده، کامپوزیت‌هایی به صورت چهار لایه با آرایش تک جهته طراحی شد سپس فرآیند فشار بر روی آنها اعمال گردیده است. خواص مکانیکی لایه‌های کامپوزیت به صورت رفتار الاستیک-پلاستیک تعریف شده است. در بخش الاستیک مواد از نوع لمینا و در بخش پلاستیک از نوع ایزوتروپیک تعریف شده‌اند. برای ارزیابی شبیه‌سازی انجام شده، نتایج حاصل از تحلیل نرم‌افزار با نتایج آزمایش تجربی کامپوزیتهایی با رفتار غیرخطی، مقایسه گردیده است. از نتایج این پژوهش می‌توان دریافت مدل ارائه شده در حد قابل قبول، خواص فشاری درون‌صفحه‌ای همچون نمودار تنش فشاری نسبت به کرنش را در نمونه‌های دارای رفتار غیر خطی تعیین می‌نماید. به گونه‌ای که درصد اختلاف بیشینه تنش فشاری تئوری و تجربی در نمونه‌های بررسی شده 8 تا 17 درصد بوده است. برای بهبود مدل ارائه شده و دستیابی به مدل کامپوزیتی نزدیکتر به حالت واقعی، باید فرضیات مدل تئوری را تصحیح و یا کاهش داد.  }, keywords_fa = {خواص فشاری درون صفحه‌ای,اجزای محدود,کامپوزیت,رفتار غیرخطی}, url = {https://www.jtst.ir/article_9186.html}, eprint = {https://www.jtst.ir/article_9186_0df2615e0722a78402f9e95d12e977b8.pdf} } @article { author = {دهقانی, علی and شهیکی تاش, محمد نبی and حسین زاده, سمانه and عامری, مجید}, title = {The Impact of Trade Openness on the Labor Force Market, Case study of Iranian Textiles industries (A Static Panel Data Approach)}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {11-20}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The main purpose of this paper is to investigate the impact of trade openness on Iranian Textiles industries over the period of 2009-1994. For this purpose in this study, the ratio of export to Production Value has been considered as a proxy for trade openness and the main model has been estimated by using a Static Panel Data (SPD) approach. The main findings of this study indicate that the trade openness has positive and significant effect on the employment and real wage in the Iranian Textiles industries. Moreover, the Production value and the real wage have positive and significant effect on the employment and real wage in the Iranian Textiles industries. Hence the main implication policy of this paper is that the policy makers should be adopts a good policy to expand the Iranian Textiles exports for improvement of employment and real wage in Iranian Textiles industries. Moreover, decreasing the unemployment and increasing the industrial exports are the second best policies.}, keywords = {Trade openness,employment,Real Wage,SPD Approach,Iranian Textiles industries}, title_fa = {اثر شدت تجارت بر بازار کار صنایع تولید محصولات نساجی، چرم، کیف و کفش ایران}, abstract_fa = {هدف اصلی این مطالعه بررسی تأثیر شدت تجارت بر میزان اشتغال و دستمزدهای واقعی در صنایع تولید محصولات نساجی، چرم، کیف و کفش ایران در سالهای 1388-1374 می باشد. برای این منظور در این مطالعه از نسبت صادرات به ارزش تولید در کدهای چهار رقمی مربوط به صنایع تولید محصولات نساجی، چرم، کیف و کفش ایران استفاده شده و مدل مربوط به تأثیر شدت تجارت بر سطح اشتغال و دستمزد واقعی صنایع با بهره گیری از رهیافت داده های تابلویی ایستا تخمین زده شده است. نتایج حاصل از تخمین مدل دلالت بر تأثیر مثبت و معنی دار شدت تجارت بر میزان اشتغال و دستمزدهای واقعی صنایع دارد و در این بین، تاثیر درجه باز بودن اقتصاد بر میزان اشتغال بیش از سطح دستمزدها می باشد. علاوه بر این تأثیر متغیرهای ارزش تولید و دستمزد حقیقی نیروی کار بر میزان اشتغال صنایع مثبت و معنی دار بوده است. از اینرو مهمترین توصیه سیاستی این مطالعه آن است که سیاستگذاران اقتصادی با بکارگیری سیاستهای مناسب به افزایش میزان صادرات محصولات منسوجات ایران مبادرت ورزیده و از این طریق زمینه را برای افزایش سطح اشتغال، کاهش نرخ بیکاری، افزایش صادرات غیرنفتی و افزایش سطح دستمزدهای حقیقی نیروی کار فراهم نمایند.}, keywords_fa = {شدت تجارت,میزان اشتغال,دستمزد واقعی,رهیافت داده های تابلویی ایستا,صنایع تولید محصولات نساجی و چرم و کیف و کفش ایران}, url = {https://www.jtst.ir/article_9187.html}, eprint = {https://www.jtst.ir/article_9187_549f570af57716a89151484f47133a36.pdf} } @article { author = {Zebarjad, Seyed Mojtaba and جانقربان, کمال and کتویی زاده, الهام}, title = {Treatment of Cotton Fibers with Hydrophilic Compounds for Production of Photo catalytic Fabrics}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {21-27}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Decoration of natural fibers such as cotton with titanium dioxide nano particles causes to active their photo catalytic and hydrophilic properties. In this study, the titanium hydroxide solution was synthesized at neutral pH and was deposited at low temperature over cotton fabrics. Afterward, titanium dioxide nanoparticles were formed by dehydration treatment in order to stick the nano particles to the fibers. In order to elucidate the role of nano sized TiO2 particles on the physical and mechanical properties of cotton fabrics, DSA (Drop shape analysis), UV-Vis (Ultraviolet-Visible spectro photometry), tensile test and microscopic evaluations were performed. Visual inspection shows that, addition of metal oxide has not any significant effects on the appearance and the pore size of the fabric. The results of microscopic evaluations show that the nano particles are dispersed over the surface of the fibers properly. The result of DSA test shows that the contact angle of water drop over the decorated fabric by 30.167 %wt. of nanoparticles, depends strongly on the presence of the nano particles, and contact angle is changed from 116.4º to 56.6º. The UV-Vis analysis proves the ability of titanium dioxide nano particles to absorb energy and also to decompose the methylene blue dye. The result of tensile test shows that the strength of the decorated fabric is higher than that of the bare fabric of about 30N.}, keywords = {synthesis of nano particles of titanium dioxide,hydrophilic,Photo catalyst,self-cleaning behavior}, title_fa = {عمل آوری الیاف طبیعی پنبه با ترکیبات آبدوست برای تولید پارچه‌های نورکاتالیزور}, abstract_fa = {لایه‌نشانی الیاف طبیعی بوسیله‌ی نانو‌ذرات‌ دی‌اکسید‌تیتانیوم موجب ایجادخاصیت فوتوکاتالیستی و ‌آب‌دوستی روی پارچه می‌شود. در این پژوهش، ‌محلول حاوی ترکیب هیدروکسید‌‌تیتانیوم تحتpH خنثی سنتز شده و سپس لایه‌نشانی روی پارچه‌ی پنبه‌ای در دمای پایین انجام پذیرفت و پس از عملیات دی‌هیدراته، نانوذرات دی‌اکسید تیتانیوم در الیاف پارچه به‌جای ماند. برای بررسی تاثیر افزودن نانوذرات دی‌اکسید تیتانیوم روی خواص‌فیزیکی و شیمیایی پارچه، آزمون‌های DSA (Drop shape analysis)،UV-Vis (Ultraviolet-Vis) اسپکتروفوتومتری، آزمون کشش و ارزیابی میکروسکوپی انجام پذیرفت. مشاهدات استریوگرافی سطح پارچه نشان می‌دهد که افزودن نانوذرات دی اکسید تیتانیوم به پارچه تغییرات محسوسی روی ظاهر و سایز حفرات پارچه ایجاد نمی‌کند. نتیج ارزیابی میکروسکوپی SEM توزیع نانو‌ذرات روی سطح الیاف را به خوبی نشان می‌دهد. نتایج آزمون زاویه‌ی‌تماس سطحی پارچه توسط قطرات آب نشان می‌دهد که زاویه‌ی سطحی آب با پارچه به شدت تحت تاثیر وجود نانوذرات روی سطح می‌باشد، به طوری که این زاویه با افزودن 167/30% درصد‌وزنی از نانوذرات دی اکسید تیتانیوم، از 4/116درجه به 6/56درجه تغییر می‌کند. نمودار جذب فرابنفش-مرئی UV-Visقابلیت جذب انرژی برای فعالیت فوتو-کاتالیستی را نشان می‌دهد و همچنین تجزیه‌ی ماده‌ی رنگ‌زای متیلن بلو MB مشاهده می‌شود. استحکام کششی پارچه‌ی لایه نشانی شده توسط نانوذرات دی‌اکسید تیتانیوم حدود 30 نیوتن بیشتر از پارچه معمولی است.}, keywords_fa = {سنتز نانو‌ذرات دی‌اکسید تیتانیوم,آب‌دوست,فوتوکاتالیست,خودتمیزشونده}, url = {https://www.jtst.ir/article_9188.html}, eprint = {https://www.jtst.ir/article_9188_01dfcbc438be6d0881fa4f8ec14402e9.pdf} } @article { author = {ابراهیمی, سعید and حاجی زاده, ایمان and پیوندی, پدرام}, title = {An approach for calculation of the needle penetration force in warp-weft fabrics}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {29-38}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The needle penetration force is an important factor which has substantial effect on the stitch quality and the amount of possible damage to the fabric. In this regard, developing predictive models for calculating the amount of needle force is related to the important factors of fabric and needle. In this paper, first the predictive model of Lomov for calculating the needle penetration forces is briefly introduced. Then, the necessary steps to improve this model are presented. For this purpose, the amount of needle penetration force is obtained as a function of the needle tip diameter. In the next step, three different cases of Lomov's model for possible contact between the needle and the fabric are introduced. In addition to the resultant forces from movement of the warp and weft threads, the required rupture force is calculated. Finally, the maximum needle penetration force calculated from our predictive mathematical model is compared with an experimental study for three fabric types.}, keywords = {needle,penetration force,sewing machine,fabric,warp and weft}, title_fa = {محاسبه نیروی نفوذ سوزن در پارچه‌های تاری-پودی}, abstract_fa = {نیروی نفوذ سوزن در پارچه از عوامل مهم در کیفیت فرآیند دوخت و میزان آسیب وارده به پارچه می‌باشد. در این راستا، تعیین دقیق نیروی نفوذ سوزن در پارچه، به عنوان یکی از پارامترهای مؤثر در تضمین کیفیت دوخت منسوجات از اهمیت خاصی برخوردار است. در این مقاله ابتدا مدل نظری ارائه شده توسط لوموف برای محاسبه نیروهای وارده به سوزن به اختصار معرفی می‌شود و سپس مراحل لازم برای تعمیم این مدل نظری ارائه می‌شود. در تکمیل مدل پیشنهادی لوموف به بررسی تغییرات نیروی نفوذ برحسب زمان برای قطر‌های مختلف سوزن پرداخته می‌شود. سه حالت خاص از مدل لوموف در بررسی نحوه برخورد سوزن با پارچه و تأثیر آن در نیروی نفوذ ارائه می‌شود. علاوه بر نیروهای مقاوم در برابر جابجایی نخ، نیروی پارگی نخ نیز محاسبه می‌شود. در انتها، حداکثر نیروی نفوذ سوزن برای سه نمونه پارچه حاصل از مدل نظری ارائه شده با نتایج حاصل از یک مطالعه آزمایشگاهی که به وسیله دستگاه سنجش قابلیت دوخت پارچه اندازه گیری صورت گرفته است مقایسه می‌شود. با توجه به نتایج حاصل، مدل ارائه شده با دقت قابل قبولی نیروی نفوذ سوزن در پارچه را محاسبه می‌کند.}, keywords_fa = {سوزن,نیروی نفوذ,ماشین دوزندگی,پارچه,تار و پود}, url = {https://www.jtst.ir/article_9189.html}, eprint = {https://www.jtst.ir/article_9189_2cf21073b9f4d86be85fcd9dced31177.pdf} } @article { author = {Khalilipourroodi, Khalilorrahman and داداشیان, فاطمه}, title = {The effect of consumer's attitude toward environment on environmentally friendly behavior and green apparel purchasing}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {39-48}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The growing social concern for the environment has recently appeared as a key issue in marketing. Emerging markets for environmental products in Iran mean promising opportunities for international green marketing. Currently, there is no actual definition for green clothing in Iran. Therefore, the objective of this research is to evaluate consumer knowledge, beliefs and attitudes toward purchasing intention behavior for green apparel. In this study, the Theory of Planned Behavior (TPB) was used to develop a model to assess tendency toward purchasing green apparel. To increase the scope of the model, several variables were added as factors that influence the intention to purchase. This research is performed on a convenience sample of consumers who represent a major future market for environmentally friendly products. Data was collected from respondents (N=774) using a self-administrated survey. Results indicate significant relationships for proposed hypotheses. Furthermore, results suggest that consumer knowledge of environmental problems and attitudes toward purchasing environmentally friendly apparel are influential on the intention to purchase green apparel.}, keywords = {Consumer's attitude,Environmental protection behaviors,green apparel,consumer's purchasing behavior}, title_fa = {اثر سازه های نگرش زیست محیطی مصرف کننده بر رفتارهای دوست دار محیط زیست و خرید پوشاک سبز}, abstract_fa = {اهمیت روزافزون نگرانی زیست محیطی و عرضه کالاهایی با سازگاری بیش تر با محیط زیست، آمادگی بیش تر برای رو به رو شدن با بازار جدید محصولات سبز را می طلبد. به همین دلیل تصمیم رفتار خرید محصول سبز بر اساس نگرش های پیشین در مواجهه با محصول دوست دار محیط زیست بررسی شده تا بر اساس آن خرید محصول سبز پیش بینی گردد. هدف ازاین پژوهش بررسی نگرش مصرف کنندگان نسبت به محیط زیست و مسئولیت اجتماعی شرکت ها و تاثیر آن برتصمیم خرید سبز و تعیین ارتباط بین نگرش و سازه های آن با رفتارهای محافظتی نسبت به محیط زیست و تصمیم خرید سبز است. به همین منظور فرضیه هایی تعیین و بر اساس مطالعات انجام شده در زمینه رفتار مصرف کننده، با استفاده از تئوری عمل منطقی و رفتار برنامه ریزی شده مدل پیشنهادی این تحقیق ارائه شد. داده ها توسط ترکیب نمونه گیری تصادفی خوشه ای و نمونه گیری در دسترس با تکمیل 774 پرسش نامه جمع آوری گردید. فرضیه های مطرح شده با استفاده از آزمون های ناپارامتری مورد تحقیق قرار گرفت. نتایج تحقیق نشان داد که سطح آگاهی از برندها و منسوجات سبز در جامعه آماری مورد بررسی نسبت به سایر متغیرهای اساسی پژوهش با میانگین 81/1 از 5 پایین است. این امر با نگرش های مرتبط با خرید سبز و به تبع آن تصمیم خرید پوشاک سبز در آینده ارتباط معنادار دارد. آزمون های دیگر و اثبات فرضیه ها، مدل ارائه شده این تحقیق را ثابت کرد.}, keywords_fa = {نگرش مصرف کننده,رفتارهای محافظتی زیست محیطی,پوشاک سبز,رفتار خرید مصرف کننده}, url = {https://www.jtst.ir/article_9190.html}, eprint = {https://www.jtst.ir/article_9190_f6859e4168e461319eb425e0d16c1c59.pdf} } @article { author = {Alijanlo, Shams--allah}, title = {Roles of Upstream Polyethylene Terephthalate Fiber Manufacturers in Improvements of the Textile Industries Value added}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {3}, pages = {49-51}, year = {2014}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Polyester fiber, the most-used synthetic fiber worldwide, is of great importance. In this paper, the capacity of upstream unit operation of polyester fiber in Iran is reviewed. The variations in the development, properties, and applications of polyester fibers are discussed. Finally, some of the features of Polyacryl Isfahan Co. for production of various types of polyester fibers and yarns are highlighted.}, keywords = {}, title_fa = {(مقاله بخش صنعت) نقش واحدهای بالادستی الیاف پلی استر در افزایش ارزش افزوده صنعت نساجی}, abstract_fa = {الیاف پلی استر با بیشترین سهم مصرف در بین الیاف مصنوعی، در سطح دنیا، از اهمیت زیادی برخوردار است. در این مقاله ابتدا به ظرفیت واحدهای بالادستی الیاف پلی استر در ایران اشاره می شود و سپس تنوع توسعه الیاف پلی استر، ویژگی ها و انواع کاربرد الیاف پلی استر مورد بحث قرار می گیرد. در پایان نیز مزیت شرکت پلی آکریل اصفهان در تولید انواع الیاف و نخ پلی استر توضیح داده می شود.}, keywords_fa = {الیاف پلی استر,نخ رشته ای,ظرفیت تولید}, url = {https://www.jtst.ir/article_9191.html}, eprint = {https://www.jtst.ir/article_9191_496597558be1773a6db36d59bdf28f77.pdf} }